[[nokia_fygm]]
Trace:
Show page
AdminRecent ChangesSitemap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
nokia_fygm [2021/02/23 20:39]
john [Headers] 		nokia_fygm [2021/02/23 20:40] (current)
john [Headers]
Line 18: Line 18:
 The FYGM has three headers with which it can be interacted. Some boards have J3 and J7 populated, but not all. They use standard 0.1" pin pitch headers so it's trivial to add pins. Additionally, there is enough clearance to put the lid back on if these headers are installed, but there will probably not be enough room to have leads connected to them //and// put the lid back on. If you're suitably crazy, you can use standard M3 standoff extensions to get around this, [[https://ljck.org/lib/exe/detail.php?id=nokia_fygm&media=fygm_lifted_lid.png|like I did]]. The FYGM has three headers with which it can be interacted. Some boards have J3 and J7 populated, but not all. They use standard 0.1" pin pitch headers so it's trivial to add pins. Additionally, there is enough clearance to put the lid back on if these headers are installed, but there will probably not be enough room to have leads connected to them //and// put the lid back on. If you're suitably crazy, you can use standard M3 standoff extensions to get around this, [[https://ljck.org/lib/exe/detail.php?id=nokia_fygm&media=fygm_lifted_lid.png|like I did]].
  
-**J2**+== J2 ==
 J2 connects to the locking DIN connector. It carries power, ground, and three RS422 pairs. J2 connects to the locking DIN connector. It carries power, ground, and three RS422 pairs.
  
nokia_fygm.txt ยท Last modified: 2021/02/23 20:40 by john
Show pageOld revisions
Media ManagerBack to top
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0