[[ntpgps]]

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ntpgps [2016/02/26 10:11]
admin
ntpgps [2020/02/21 12:04] (current)
Line 1: Line 1:
 ====== ntp gps setup ====== ====== ntp gps setup ======
-This process has been complicated and messy, because of the combination of 1) I don't know what I'm doing, and 2) the resources on this are good but complicated. Almost everything I've figured out has come from these two pages:+This process has been complicated and messy, because of the combination of 1) I don't know what I'm doing, and 2) the resources on this are good but complicated. Almost everything I've figured out has come from these three pages:
   * http://kenyonralph.com/~kenyon/Time_server/   * http://kenyonralph.com/~kenyon/Time_server/
   * http://superuser.com/questions/828036/how-can-i-check-whether-my-ntp-daemon-has-pps-support   * http://superuser.com/questions/828036/how-can-i-check-whether-my-ntp-daemon-has-pps-support
 +  * http://www.rjsystems.nl/en/2100-ntpd-garmin-gps-18-lvc-gpsd.php#qrks
  
 I had to fill in a few holes here and there, so I am going to try and get a comprehensive guide in place here, because I will forget.  I had to fill in a few holes here and there, so I am going to try and get a comprehensive guide in place here, because I will forget. 
- 
 ===== Setup ===== ===== Setup =====
   * dc7900 running ubu server 14.04   * dc7900 running ubu server 14.04
Line 85: Line 85:
  
  
-====== To Do ======+====== To D0 & Thoughts ======
 Right now my offset and jitter can be improved. This can be done by: Right now my offset and jitter can be improved. This can be done by:
   * Disable all but GPGGA   * Disable all but GPGGA
   * Push pulse width to 200ms   * Push pulse width to 200ms
-  * Some people don't like, and have trouble with, the 18x LVC: http://support.ntp.org/bin/view/Support/ConfiguringGarminRefclocks +  * Some people don't like, and have trouble with, the 18x LVC: 
-  * Similar to above: http://support.ntp.org/bin/view/Support/ConfiguringNMEARefclocks +    * http://support.ntp.org/bin/view/Support/ConfiguringGarminRefclocks 
-    * I think it's worth noting that my jitter is WAY lower than being reported there. One guy is setting 5-10ms jitter while I am reporting 0.024ms jitter. Either that guy has a bad unit and is being a negative nancy, or firmware updates have made them notably better.+  * Similar to above: 
 +    * http://support.ntp.org/bin/view/Support/ConfiguringNMEARefclocks 
 +    * I think it's worth noting that my jitter is WAY lower than being reported there. One guy is setting 5-10ms jitter while I am seeing <0.024ms jitter. Either that guy has a bad unit and is being a negative nancy, or firmware updates have made them notably better.
   * Get serial pass-through working on the TS140. This will take some tinkering but should be doable. Latency is my only concern.   * Get serial pass-through working on the TS140. This will take some tinkering but should be doable. Latency is my only concern.
ntpgps.1456499479.txt.gz · Last modified: 2020/02/21 12:04 (external edit)
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0